Optimizing Single-Inverter Electric Differential System for Electric Vehicle Propulsion Applications
(1) Rachad Moumni Mail (Ziane Achour University, Algeria)
(2) Kouider Laroussi Mail (Ziane Achour University, Algeria)
(3) Idriss Benlaloui Mail (University of Batna 2, Algeria)
(4) Mohamed Metwally Mahmoud Mail (Aswan University, Egypt)
(5) * Mohamed F. Elnaggar Mail (1) Department of Electrical Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia. 2) Department of Electrical Power and Machines Engineering, Faculty of Engineering, Helwan University, Helwan 11795, Egypt)
*corresponding author

Abstract


The increasing demand for electric vehicles (EVs) is driven by the urgent need for environmentally friendly transportation. This paper addresses the challenge of optimizing EV drivetrain efficiency by proposing a novel single-inverter electronic differential system for distributed EV drivetrains. The research focuses on reducing system cost and complexity while maintaining high performance. The methodology involves a detailed simulation using MATLAB/Simulink to validate the theoretical soundness of the proposed connection method. The results demonstrate that the proposed system achieves a minimum accuracy rate of 97.5%, marking a significant improvement over traditional dual-inverter systems. This approach not only enhances drivetrain efficiency but also contributes to more compact and cost-effective vehicle designs. Additionally, the findings underscore the potential for further refinement and exploration, suggesting that continued advancements in ED systems could lead to even greater performance gains in the future. This research lays the groundwork for future innovations in EV technology, particularly in the areas of cost reduction and system efficiency.

Keywords


Electrical Vehicle; Electric Differential; Single Inverter; Distributed EV Drivetrain; Mechanical Differential; Traction Control; Clean Energy

   

DOI

https://doi.org/10.31763/ijrcs.v4i4.1542 		      

Article metrics

10.31763/ijrcs.v4i4.1542 Abstract views : 358 | PDF views : 93

   

Cite

How to cite item
   

Full Text

Download

References


[1] E. Agamloh, A. Von Jouanne, and A. Yokochi, "An overview of electric machine trends in modern electric vehicles," Machines, vol. 8, no. 2, p. 20, 2020, https://doi.org/10.3390/machines8020020.

[2] I. Husain et al., "Electric Drive Technology Trends, Challenges, and Opportunities for Future Electric Vehicles," Proceedings of the IEEE, vol. 109, no. 6, pp. 1039-1059, 2021, https://doi.org/10.1109/JPROC.2020.3046112.

[3] K. Glitman, D. Farnsworth, and J. Hildermeier, "The role of electric vehicles in a decarbonized economy: Supporting a reliable, affordable and efficient electric system," The Electricity Journal, vol. 32, no. 7, p. 106623, 2019, https://doi.org/10.1016/j.tej.2019.106623.

[4] P. Barman, "Electronic differential: A vital component of electric vehicles," IEEE Potentials, vol. 43, no. 1, pp. 4-7, 2024, https://doi.org/10.1109/MPOT.2023.3280338.

[5] S. Thangavel, D. Mohanraj, T. Girijaprasanna, S. Raju, C. Dhanamjayulu and S. M. Muyeen, "A Comprehensive Review on Electric Vehicle: Battery Management System, Charging Station, Traction Motors," IEEE Access, vol. 11, pp. 20994-21019, 2023, https://doi.org/10.1109/ACCESS.2023.3250221.

[6] K. Kakouche, A. Oubelaid, S. Mezani, D. Rekioua, and T. Rekioua, "Different Control Techniques of Permanent Magnet Synchronous Motor with Fuzzy Logic for Electric Vehicles: Analysis, Modelling, and Comparison," Energies, vol. 16, no. 7, p. 3116, 2023, https://doi.org/10.3390/en16073116.

[7] D. Ziane, A. Azib, A. Oubelaid, N. Taib, T. Rekioua, D. Rekioua, "Proposed power factor correction circuit based on the single-ended primary-inductor converter controlled by sliding mode control strategy used in an electric vehicle charging station," Revue Roumaine Des Sciences Techniques. Serie Électrotechnique Énergetique, vol. 67, no. 3, pp. 241-245, 2022, https://journal.iem.pub.ro/rrst-ee/article/view/160.

[8] J. Liu, H. Li and Y. Deng, "Torque Ripple Minimization of PMSM Based on Robust ILC Via Adaptive Sliding Mode Control," IEEE Transactions on Power Electronics, vol. 33, no. 4, pp. 3655-3671, 2018, https://doi.org/10.1109/TPEL.2017.2711098.

[9] N. Nouria, G. B. Ghazouni, and B. Cherif, "Improved DTC strategy of an electric vehicle with four in-wheels induction motor drive 4WDEV using fuzzy logic control," International Journal of Power Electronics and Drive Systems, vol. 12, no. 2, p. 650, 2021, http://doi.org/10.11591/ijpeds.v12.i2.pp650-661.

[10] P. H. Truong, D. Flieller, N. K. Nguyen, J. Mercklé, G. Sturtzer, "Torque ripple minimization in nonsinusoidal synchronous reluctance motors based on artificial neural networks," Electric Power Systems Research, vol. 140, pp. 37-45, 2016, https://doi.org/10.1016/j.epsr.2016.06.045.

[11] M. Mosin, N. Popov, V. Anibroev, M. Vilberger, E. Domakhin, "Engine power distribution system for four-wheel drive autonomous electric vehicle," Energy Reports, vol. 9, pp. 115-122, 2023, https://doi.org/10.1016/j.egyr.2022.10.388.

[12] A. D. D. Almeida, F. Bradaschia, C. Rech, C. A. Caldeira, R. C. Neto, G. M. S. Azevedo, "Nine-Switch Multiport Converter Applied to Battery-Powered Tramway with Reduced Leakage Current," Energies, vol. 17, no. 6, p. 1434, 2024, https://doi.org/10.3390/en17061434.

[13] M. Ebadpour, M. B. Jamshidi, J. Talla, H. Hashemi-Dezaki, Z. Peroutka, "A digital twinning approach for the internet of unmanned electric vehicles (IoUEVs) in the metaverse," Electronics, vol. 12, no. 9, p. 2016, 2023, https://doi.org/10.3390/electronics12092016.

[14] P. Matam, N. Diwakarband, A. Rajasekhar, "Differential Gear Box To Reduce Vibration Using Different Materials For Vehicles-A Review," Turkish Journal of Computer and Mathematics Education, vol. 12, no. 2, pp. 1493-1496, 2021, https://doi.org/10.17762/turcomat.v12i2.1382.

[15] C. Chhlonh, B. Kim, P. Chrin, S. Am and T. Seng, "Four In-Wheel BLDC Motors Speed Control in EV Based on Hybrid Fuzzy-PI Controller Visual on GUI," 2021 International Symposium on Electrical and Electronics Engineering (ISEE), pp. 166-171, 2021, https://doi.org/10.1109/ISEE51682.2021.9418790.

[16] K. Deepak, M. A. Frikha, Y. Benômar, M. El Baghdadi, and O. Hegazy, "In-Wheel Motor Drive Systems for Electric Vehicles: State of the Art, Challenges, and Future Trends," Energies, vol. 16, no. 7, p. 3121, 2023, https://doi.org/10.3390/en16073121.

[17] N. Zhang, C. Tianfang, and H. Xuezheng, "Electric power steering system controller design using induction machine," Archives of Electrical Engineering, vol. 68, no. 2, pp. 279-293, 2019, https://journals.pan.pl/Content/111901/PDF/art_05.pdf?handler=pdf.

[18] Y. Amry, E. Elbouchikhi, F. L. Gall, M. Ghogho, S. E. Hani, “Electric vehicle traction drives and charging station power electronics: Current status and challenges,†Energies, vol. 15, no. 16, p. 6037, 2022, https://doi.org/10.3390/en15166037.

[19] A. M. Omara and M. Sleptsov, "Drive system of IPMSM with bidirectional DC/DC converter for battery-powered electric vehicles," 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC), pp. 1-5, 2016, https://doi.org/10.1109/EEEIC.2016.7555816.

[20] K. D. Osborne and M. S. Sulek, "Ford's Zero Emission P2000 Fuel Cell Vehicle," SAE Technical Paper, 2000, https://www.sae.org/publications/technical-papers/content/2000-01-c046/.

[21] A. Haddoun, M. E. H. Benbouzid, D. Diallo, R. Abdessemed, J. Ghouili and K. Srairi, "Design and implementation of an Electric Differential for traction application," 2010 IEEE Vehicle Power and Propulsion Conference, pp. 1-6, 2010, https://doi.org/10.1109/VPPC.2010.5729056.

[22] M. Mosin, N. Popov, V. Anibroev, M. Vilberger, E. Domakhin, "Engine power distribution system for four-wheel drive autonomous electric vehicle," Energy Reports, vol. 9, pp. 115-122, 2023, https://doi.org/10.1016/j.egyr.2022.10.388.

[23] A. Haddoun, F. Khoucha, M. E. H. Benbouzid, D. Diallo, R. Abdessemed and K. Srairi, "SDTC Neural Network Traction Control of an Electric Vehicle without Differential Gears," 2007 IEEE Vehicle Power and Propulsion Conference, pp. 259-266, 2007, https://doi.org/10.1109/VPPC.2007.4544135.

[24] R. Moumni, I. Benlaloui and K. Laroussi, "Improved Efficiency and Performance of the Energy Storage System for an EV," 2023 International Conference on Advances in Electronics, Control and Communication Systems (ICAECCS), pp. 1-5, 2023, https://doi.org/10.1109/ICAECCS56710.2023.10104767.

[25] R. Moumni, I. Benlaloui, K. Laroussi, N. Benalia, "Enhancing passive cell balancing techniques for electric vehicles," Studies in Engineering and Exact Sciences, vol. 5, no. 1, pp. 1135-1151, 2024, https://doi.org/10.54021/seesv5n1-059.

[26] R. Moumni, I. Benlaloui and K. Laroussi, "Optimization of Passive cell balancing technique for Electric Vehicles," 2023 1st International Conference on Renewable Solutions for Ecosystems: Towards a Sustainable Energy Transition (ICRSEtoSET), pp. 1-6, 2023, https://doi.org/10.1109/ICRSEtoSET56772.2023.10525666.

[27] A. N. Ouda and A. Mohamed, "Autonomous fuzzy heading control for a multi-wheeled combat vehicle," International Journal of Robotics and Control Systems, vol. 1, no. 1, pp. 90-101, 2021, https://doi.org/10.31763/ijrcs.v1i1.286.

[28] O. J. Tola, E. A. Umoh, and E. A. Yahaya, "Pulse width modulation analysis of five-level inverter-fed permanent magnet synchronous motors for electric vehicle applications," International Journal of Robotics and Control Systems, vol. 1, no. 4, pp. 477-487, 2021, https://doi.org/10.31763/ijrcs.v1i4.483.

[29] A. A. Rizi, A. Rezaei, M. G. Rizi, M. A. Rizi, "Design a new multiport DC-DC converter to charge an electric car," International Journal of Robotics and Control Systems, vol. 2, no. 1, pp. 87-96, 2022, https://doi.org/10.31763/ijrcs.v2i1.566.

[30] M. S. Mahmoud, R. A. A. Saleh, and A. Ma’arif, "Stabilizing of inverted pendulum system using Robust sliding mode control," International Journal of Robotics and Control Systems, vol. 2, no. 2, pp. 230-239, 2022, https://doi.org/10.31763/ijrcs.v2i2.594.

[31] C. J. T. Manuel, M. M. D. Santos, G. G. Lenzi, A. M. Tusset, "Longitudinal Modeling of a Road Vehicle: 4-Wheel Traction," International Journal of Robotics and Control Systems, vol. 2, no. 2, pp. 357-369, 2022, https://doi.org/10.31763/ijrcs.v2i2.698.

[32] W. Farag, M. Abouelela, and M. Helal, "Finding and Tracking Automobiles on Roads for Self-Driving Car Systems," International Journal of Robotics and Control Systems, vol. 3, no. 4, pp. 704-727, 2023, https://doi.org/10.31763/ijrcs.v3i4.1022.

[33] N. T. Pham, "Design of Novel STASOSM Controller for FOC Control of Dual Star Induction Motor Drives," International Journal of Robotics and Control Systems, vol. 4, no. 3, pp. 1059-1074, 2024, https://doi.org/10.31763/ijrcs.v4i3.1443.

[34] F. J. Perez-Pinal, I. Cervantes and A. Emadi, "Stability of an Electric Differential for Traction Applications," IEEE Transactions on Vehicular Technology, vol. 58, no. 7, pp. 3224-3233, 2009, https://doi.org/10.1109/TVT.2009.2013473.

[35] L. Cao, K. T. Chau, C. H. T. Lee and H. Wang, "A Double-Rotor Flux-Switching Permanent-Magnet Motor for Electric Vehicles With Magnetic Differential," IEEE Transactions on Industrial Electronics, vol. 68, no. 2, pp. 1004-1015, 2021, https://doi.org/10.1109/TIE.2020.2969101.

[36] U. R. Muduli, K. A. Jaafari, R. K. Behera, A. R. Beig, K. A. Hosani and J. Y. Alsawalhi, "Predictive Battery SoC Control for Dual Propulsion Differential Four Wheel Drive Electric Vehicle," 2021 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 1490-1495, 2021, https://doi.org/10.1109/ECCE47101.2021.9595587.

[37] M. L. De Klerk and A. K. Saha, "A Comprehensive Review of Advanced Traction Motor Control Techniques Suitable for Electric Vehicle Applications," IEEE Access, vol. 9, pp. 125080-125108, 2021, https://doi.org/10.1109/ACCESS.2021.3110736.

[38] R. Wang, Q. Sun, C. Sun, H. Zhang, Y. Gui and P. Wang, "Vehicle-Vehicle Energy Interaction Converter of Electric Vehicles: A Disturbance Observer Based Sliding Mode Control Algorithm," IEEE Transactions on Vehicular Technology, vol. 70, no. 10, pp. 9910-9921, 2021, https://doi.org/10.1109/TVT.2021.3105433.

[39] S. Cai, J. L. Kirtley and C. H. T. Lee, "Critical Review of Direct-Drive Electrical Machine Systems for Electric and Hybrid Electric Vehicles," IEEE Transactions on Energy Conversion, vol. 37, no. 4, pp. 2657-2668, 2022, https://doi.org/10.1109/TEC.2022.3197351.

[40] N. Ullah, C. Song, C. Zhu, Z. Ou, C. Tan, "Dynamic modeling and parametric analysis of differential gearbox used in electric vehicle," Journal of Theoretical and Applied Mechanics, vol. 58, no. 1, pp. 73-85, 2020, https://doi.org/10.15632/jtam-pl/115280.

[41] R. Hajiloo, A. Khajepour, A. Kasaiezadeh, S. -K. Chen and B. Litkouhi, "A Model Predictive Control of Electronic Limited Slip Differential and Differential Braking for Improving Vehicle Yaw Stability," IEEE Transactions on Control Systems Technology, vol. 31, no. 2, pp. 797-808, 2023, https://doi.org/10.1109/TCST.2022.3206282.

[42] J. J. Eckert, L. C. de Alkmin Silva, F. G. Dedini and F. C. Corrêa, "Electric Vehicle Powertrain and Fuzzy Control Multi-Objective Optimization, Considering Dual Hybrid Energy Storage Systems," IEEE Transactions on Vehicular Technology, vol. 69, no. 4, pp. 3773-3782, 2020, https://doi.org/10.1109/TVT.2020.2973601.

[43] R. T. Yadlapalli, A. Kotapati, R. Kandipati, C. S. Koritala, "A review on energy efficient technologies for electric vehicle applications," Journal of Energy Storage, vol. 50, p. 104212, 2022, https://doi.org/10.1016/j.est.2022.104212.

[44] K. Indu and M. A. Kumar, "Electric vehicle control and driving safety systems: A review," IETE Journal of Research, vol. 69, no. 1, pp. 482-498, 2023, https://doi.org/10.1080/03772063.2020.1830862.

[45] H. E. Hadraoui, M. Zegrari, A. Chebak, O. Laayati and N. Guennouni, "A multi-criteria analysis and trends of electric motors for electric vehicles," World Electric Vehicle Journal, vol. 13, no. 4, p. 65, 2022, https://doi.org/10.3390/wevj13040065.

[46] A. Yildiz and M. A. Özel, "A comparative study of energy consumption and recovery of autonomous fuel-cell hydrogen–electric vehicles using different powertrains based on regenerative braking and electronic stability control system," Applied Sciences, vol. 11, no. 6, p. 2515, 2021, https://doi.org/10.3390/app11062515.

[47] C. Liu, K. T. Chau, C. H. T. Lee and Z. Song, "A Critical Review of Advanced Electric Machines and Control Strategies for Electric Vehicles," Proceedings of the IEEE, vol. 109, no. 6, pp. 1004-1028, 2021, https://doi.org/10.1109/JPROC.2020.3041417.

[48] L. Shao, A. E. H. Karci, D. Tavernini, A. Sorniotti and M. Cheng, "Design Approaches and Control Strategies for Energy-Efficient Electric Machines for Electric Vehicles—A Review," IEEE Access, vol. 8, pp. 116900-116913, 2020, https://doi.org/10.1109/ACCESS.2020.2993235.

[49] M. Safayatullah, M. T. Elrais, S. Ghosh, R. Rezaii and I. Batarseh, "A Comprehensive Review of Power Converter Topologies and Control Methods for Electric Vehicle Fast Charging Applications," IEEE Access, vol. 10, pp. 40753-40793, 2022, https://doi.org/10.1109/ACCESS.2022.3166935.

[50] Z. Cao, A. Mahmoudi, S. Kahourzade and W. L. Soong, "An Overview of Electric Motors for Electric Vehicles," 2021 31st Australasian Universities Power Engineering Conference (AUPEC), pp. 1-6, 2021, https://doi.org/10.1109/AUPEC52110.2021.9597739.

[51] A. Ma’arif, A. I. Cahyadi, and O. Wahyunggoro, “CDM Based Servo State Feedback Controller with Feedback Linearization for Magnetic Levitation Ball System,†International Journal on Advanced Science, Engineering and Information Technology, vol. 8, no. 3, pp. 930-937, 2018, https://doi.org/10.18517/ijaseit.8.3.1218.

[52] A. Maarif, A. I. Cahyadi, S. Herdjunanto, Iswanto, Y. Yamamoto, “Tracking Control of Higher Order Reference Signal Using Integrators and State Feedback,†IAENG International Journal of Computer Science, vol. 46, no. 2, pp. 208-216, 2019, https://www.iaeng.org/IJCS/issues_v46/issue_2/IJCS_46_2_09.pdf.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Rachad Moumni, Kouider Laroussi, Idriss Benlaloui, Mohamed Metwally Mahmoud, Mohamed F. Elnaggar

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

About the JournalJournal PoliciesAuthor Information

International Journal of Robotics and Control Systems
e-ISSN: 2775-2658
Website: https://pubs2.ascee.org/index.php/IJRCS
Email: ijrcs@ascee.org
Organized by: Association for Scientific Computing Electronics and Engineering (ASCEE), Peneliti Teknologi Teknik Indonesia, Department of Electrical Engineering, Universitas Ahmad Dahlan and Kuliah Teknik Elektro
Published by: Association for Scientific Computing Electronics and Engineering (ASCEE)
Office: Jalan Janti, Karangjambe 130B, Banguntapan, Bantul, Daerah Istimewa Yogyakarta, Indonesia