A Review of Advanced Force Torque Control Strategies for Precise Nut-to-Bolt Mating in Robotic Assembly
(1) Terence Sy Horng Ting Mail (Tunku Abdul Rahman University of Management and Technology, Malaysia)
(2) * Yeh Huann Goh Mail (Tunku Abdul Rahman University of Management and Technology, Malaysia)
(3) Kar Mun Chin Mail (Tunku Abdul Rahman University of Management and Technology, Malaysia)
(4) Yan Kai Tan Mail (Tunku Abdul Rahman University of Management and Technology, Malaysia)
(5) Tsung Heng Chiew Mail (Tunku Abdul Rahman University of Management and Technology, Malaysia)
(6) Ge Ma Mail (Guangzhou University, China)
(7) Chong Keat How Mail (Tunku Abdul Rahman University of Management and Technology, Malaysia)
*corresponding author

Abstract


Achieving precise alignment in high-precision robotic assembly is critical, where even minor misalignments can cause significant issues. Various control strategies have been developed to tackle these challenges, including passive compliance control (PCC), active control (AC), and manual teaching method (MTC). While AC is valued for its real-time adaptability, PCC and MTC offer advantages in simpler, cost-effective applications.   This review evaluates these strategies, emphasizing the integration of AI and machine learning to address the limitations of traditional AC methods, such as spiral and tilt searches, which are rigid, slow, and computationally demanding, making them unsuitable for dynamic environments. Machine Learning (ML) and Artificial Intelligence (AI) offer data-driven improvements in performance and adaptability over time. Techniques like Linear Regression, Artificial Neural Networks (ANNs), and Reinforcement Learning (RL) are explored for enhancing precision and real-time adaptability in complex tasks. These AI methods are applied in real-world industries, such as automotive and electronics manufacturing. The review compares control strategies and AI techniques, analyzing trade-offs in accuracy, speed, computational efficiency, and cost. It also discusses future directions, including hybrid control systems, advanced sensor integration, and more sophisticated AI algorithms. Ethical and safety considerations are highlighted, particularly in industrial settings where reliability and human-robot interaction are critical. This comprehensive review demonstrates AI's potential to enhance precision, reduce manual intervention, and improve performance in high-precision robotic assembly while guiding the selection of appropriate methods for specific applications.

Keywords


Linear Regression; Artificial Neural Networks; Reinforcement Learning; Nut-to-Bolt Mating; Force-Torque Control

   

DOI

https://doi.org/10.31763/ijrcs.v5i1.1604 		      

Article metrics

10.31763/ijrcs.v5i1.1604 Abstract views : 87 | PDF views : 29

   

Cite

How to cite item
   

Full Text

Download

References


[1] M. Bartoš, V. Bulej, M. Bohušík, J. Stancek, V. Ivanov, and P. Macek, “An overview of robot applications in automotive industry,” Transportation Research Procedia, vol. 55, pp. 837–844, 2021, https://doi.org/10.1016/j.trpro.2021.07.052.

[2] L. Pompáš, L. Kucera, D. Cechmánek, and J. Fiacan, “Construction design of the reaction arm for tightening tools,” Transportation Research Procedia, vol. 74, pp. 568–575, 2023, https://doi.org/10.1016/j.trpro.2023.11.183.

[3] J. Wang, P. Wang, X. Zhou, and Z. Wang, “Study on the Tightening Characteristics of Wheel Bolts Through Real Vehicle Field-Testing,” Proceedings of China SAE Congress 2023: Selected Papers, vol. 1151, pp. 742–759, 2024, https://doi.org/10.1007/978-981-97-0252-7_53.

[4] S. K. Samantaray, S. K. Mittal, P. Mahapatra, and S. Kumar, “Assessing the flexion behavior of bolted rail joints using finite element analysis,” Engineering Failure Analysis, vol. 104, pp. 1002–1013, 2019, https://doi.org/10.1016/j.engfailanal.2019.06.057.

[5] X. Shen, L. Lu, and D. Zeng, “Fatigue failure analysis of high strength bolts used for high-speed railway vehicle braking discs,” Engineering Failure Analysis, vol. 115, p. 104661, 2020, https://doi.org/10.1016/j.engfailanal.2020.104661.

[6] W. Chen, Z. Wu, Z. Zhu, W. Chen, W. Wang, and Z. Zeng, “Pull out and pre-tightening force tests for plastic dowel of the railway sleeper considering the influence of installing torque and frost force,” Construction and Building Materials, vol. 267, p. 120948, 2021, https://doi.org/10.1016/j.conbuildmat.2020.120948.

[7] D. M. Bastidas, A. Gil, U. Martin, J. Ress, J. Bosch, and S. F. Medina, “Failure analysis of boron steel 27MnCrB5-2 structural bolts during tightening of railcar wheel-axle,” Engineering Failure Analysis, vol. 124, p. 105333, 2021, https://doi.org/10.1016/j.engfailanal.2021.105333.

[8] I. Korin and J. Perez Ipiña, “Controlled residual stresses introduction to improve fatigue resistance of rotary shouldered connections used in oil drilling industry,” International Journal of Pressure Vessels and Piping, vol. 87, no. 12, pp. 696–703, 2010, https://doi.org/10.1016/j.ijpvp.2010.10.005.

[9] R. Valdez-Yepez, C. Tutivén, and Y. Vidal, “Structural health monitoring of jacket-type support structures in offshore wind turbines: A comprehensive dataset for bolt loosening detection through vibrational analysis,” Data Brief, vol. 53, p. 110222, 2024, https://doi.org/10.1016/j.dib.2024.110222.

[10] B. Mills et al., “Inspection of wind turbine bolted connections using the ultrasonic phased array system,” Heliyon, vol. 10, no. 14, p. e34579, 2024, https://doi.org/10.1016/j.heliyon.2024.e34579.

[11] A. A. Malik and A. Bilberg, “Collaborative robots in assembly: A practical approach for tasks distribution,” Procedia CIRP, vol. 81, pp. 665–670, 2019, https://doi.org/10.1016/j.procir.2019.03.173.

[12] G. Pichon, A. Daidié, E. Paroissien, and A. Benaben, “Quasi-static strength and fatigue life of aerospace hole-to-hole bolted joints,” Engineering Failure Analysis, vol. 143, p. 106860, 2023, https://doi.org/10.1016/j.engfailanal.2022.106860.

[13] F. Ansari, P. Hold, and M. Khobreh, “A knowledge-based approach for representing jobholder profile toward optimal human–machine collaboration in cyber physical production systems,” CIRP Journal of Manufacturing Science and Technology, vol. 28, pp. 87–106, 2020, https://doi.org/10.1016/j.cirpj.2019.11.005.

[14] N. Pitchandi, “Influence of viscoelastic property of compliance material in achieving successful robotic Peg-In-Hole,” MaterialsToday: Procedings, vol. 66, pp. 871–877, Jan. 2022, https://doi.org/10.1016/j.matpr.2022.04.503.

[15] N. Pitchandi, S. P. Subramanian, and M. Irulappan, “Insertion force analysis of compliantly supported peg-in-hole assembly,” Assembly Automation, vol. 37, no. 3, pp. 285–295, 2017, https://doi.org/10.1108/AA-12-2016-167.

[16] T. Nishimura, Y. Suzuki, T. Tsuji and T. Watanabe, "Peg-in-hole under state uncertainties via a passive wrist joint with push-activate-rotation function," 2017 IEEE-RAS 17th International Conference on Humanoid Robotics (Humanoids), pp. 67-74, 2017, https://doi.org/10.1109/HUMANOIDS.2017.8239539.

[17] H. I. Lin and Y. H. Lin, “A novel teaching system for industrial robots,” Sensors, vol. 14, no. 4, pp. 6012–6031, 2014, https://doi.org/10.3390/s140406012.

[18] H. I. Lin, “Design of an intelligent robotic precise assembly system for rapid teaching and admittance control,” Robotics and Computer-Integrated Manufacturing, vol. 64, p. 101946, 2020, https://doi.org/10.1016/j.rcim.2020.101946.

[19] S. Detzel, M. Steinberger and T. C. Lueth, "A Kinesthetic Teaching System for a Robotic Arm for Middle Ear Surgery," 2018 IEEE International Conference on Robotics and Biomimetics (ROBIO), pp. 1870-1875, 2018, https://doi.org/10.1109/ROBIO.2018.8665216.

[20] F. Zhang, L. Lin, L. Yang, and Y. Fu, “Design of an active and passive control system of hand exoskeleton for rehabilitation,” Applied Sciences, vol. 9, no. 11, p. 2291, 2019, https://doi.org/10.3390/app9112291.

[21] H.-S. Kim, I.-M. Kim, and J.-B. Song, “Design of Safe Joint Module for Safe Robot Arm based on Passive and Active Compliance Methods,” Australian Information Security Management Conference, vol. 22, no. 7, pp. 1023-1-30, 2010, https://doi.org/10.1016/j.mechatronics.2012.08.007.

[22] M. Tiboni, A. Borboni, F. Vérité, C. Bregoli, and C. Amici, “Sensors and Actuation Technologies in Exoskeletons: A Review,” Sensors, vol. 22, no. 3, p. 884, 2022, https://doi.org/10.3390/s22030884.

[23] D. Li, H. Zhao, D. Ge, X. Li and H. Ding, "A Novel Robotic Multiple Peg-in-Hole Assembly Pipeline: Modeling, Strategy, and Control," IEEE/ASME Transactions on Mechatronics, vol. 29, no. 4, pp. 2602-2613, 2024, https://doi.org/10.1109/TMECH.2023.3337102.

[24] V. R. F. Miranda, A. M. C. Rezende, T. L. Rocha, H. Azpúrua, L. C. A. Pimenta, and G. M. Freitas, “Autonomous Navigation System for a Delivery Drone,” Journal of Control, Automation and Electrical Systems, vol. 33, no. 1, pp. 141–155, 2022, http://dx.doi.org/10.1007/s40313-021-00828-4.

[25] J. Xu, C. Zhang, Z. Liu and Y. Pei, "A Review on Significant Technologies Related to the Robot-Guided Intelligent Bolt Assembly Under Complex or Uncertain Working Conditions," IEEE Access, vol. 7, pp. 136752-136776, 2019, https://doi.org/10.1109/ACCESS.2019.2941918.

[26] Y. K. Tan, K. M. Chin, T. S. H. Ting, Y. H. Goh and T. H. Chiew, "Research on YOLOv8 Application in Bolt and Nut Detection for Robotic Arm Vision," 2024 16th International Conference on Knowledge and Smart Technology (KST), pp. 126-131, 2024, https://doi.org/10.1109/KST61284.2024.10499651.

[27] J. Xu, K. Liu, Y. Pei, C. Yang, Y. Cheng and Z. Liu, "A Noncontact Control Strategy for Circular Peg-in-Hole Assembly Guided by the 6-DOF Robot Based on Hybrid Vision," IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1-15, 2022, https://doi.org/10.1109/TIM.2022.3164133.

[28] L. W. Tseng, C. H. Chung, and W. L. Huang, “Bolt Tightening Methods on the Combined Surface of Assembly Structure,” Universal Journal of Mechanical Engineering, vol. 8, no. 6, pp. 305–314, 2020, https://doi.org/10.13189/UJME.2020.080603.

[29] B. Taylor, “The Strength of Large Bolts Subjected to Cyclic Loading,” Transactions, vol. 64, no. 1, 1952, https://library.imarest.org/record/574.

[30] M. Farajtabar and M. Charbonneau, “The path towards contact-based physical human–robot interaction,” Robotics and Autonomous Systems, vol. 182, p. 104829, 2024, https://doi.org/10.1016/j.robot.2024.104829.

[31] Iso. org, “ISO 10218-1:2011(en), Robots and robotic devices — Safety requirements for industrial robots — Part 1: Robots,” iso. org, 2011, https://www.iso.org/obp/ui/#iso:std:iso:10218:-1:ed-2:v1:en

[32] A. Seth, J. M. Vance, and J. H. Oliver, “Virtual reality for assembly methods prototyping: A review,” Virtual Reality, vol. 15, no. 1, pp. 5–20, 2011, http://dx.doi.org/10.1007/s10055-009-0153-y.

[33] T. Tang, H. -C. Lin, Yu Zhao, Wenjie Chen and M. Tomizuka, "Autonomous alignment of peg and hole by force/torque measurement for robotic assembly," 2016 IEEE International Conference on Automation Science and Engineering (CASE), pp. 162-167, 2016, https://doi.org/10.1109/COASE.2016.7743375.

[34] A. Khaheshi, P. Singh, S. Lavandeira, S. Gorb, and H. Rajabi, “Bioinspired compliant joints for passive-automatic adaptability,” Materials & Design, vol. 241, p. 112910, 2024, https://doi.org/10.1016/j.matdes.2024.112910.

[35] Z. Chen et al., “Adaptive impedance control for docking robot via Stewart parallel mechanism,” ISA Transactions, pp. 1–12, 2024, https://doi.org/10.1016/j.isatra.2024.09.008.

[36] W. Deng, C. Zhang, Z. Zou, M. Gao, X. Wang and W. Yu, "Peg-in-hole assembly of industrial robots based on Object detection and Admittance force control," 2021 36th Youth Academic Annual Conference of Chinese Association of Automation (YAC), pp. 672-677, 2021, https://doi.org/10.1109/YAC53711.2021.9486619.

[37] M. Ikram et al., “Flexible temperature and humidity sensors of plants for precision agriculture: Current challenges and future roadmap,” Computers and Electronics in Agriculture, vol. 226, p. 109449, 2024, https://doi.org/10.1016/j.compag.2024.109449.

[38] S. A. Kouritem, M. I. Abouheaf, N. Nahas, M. Hassan, “A multi-objective optimization design of industrial robot arms,” Alexandria Engineering Journal, vol. 61, no. 12, pp. 12847-12867, 2022, https://doi.org/10.1016/j.aej.2022.06.052.

[39] Y. Chen, J. Yu, L. Shen, Z. Lin and Z. Liu, "Vision-Based High-Precision Assembly with Force Feedback," 2023 9th International Conference on Control, Automation and Robotics (ICCAR), pp. 399-404, 2023, https://doi.org/10.1109/ICCAR57134.2023.10151762.

[40] H. Park, J. Park, D. -H. Lee, J. -H. Park and J. -H. Bae, "Compliant Peg-in-Hole Assembly Using Partial Spiral Force Trajectory With Tilted Peg Posture," IEEE Robotics and Automation Letters, vol. 5, no. 3, pp. 4447-4454, 2020, https://doi.org/10.1109/LRA.2020.3000428.

[41] H. Unten, S. Sakaino and T. Tsuji, "Peg-in-Hole Using Transient Information of Force Response," IEEE/ASME Transactions on Mechatronics, vol. 28, no. 3, pp. 1674-1682, 2023, https://doi.org/10.1109/TMECH.2022.3224907.

[42] H. Chen, J. Li, W. Wan, Z. Huang, and K. Harada, “Integrating Combined Task and Motion Planning with Compliant Control,” International Journal of Intelligent Robotics and Applications, vol. 4, no. 2, pp. 149–163, 2020, https://doi.org/10.1007/s41315-020-00136-1.

[43] S. Wang, G. Chen, H. Xu and Z. Wang, "A Robotic Peg-in-Hole Assembly Strategy Based on Variable Compliance Center," IEEE Access, vol. 7, pp. 167534-167546, 2019, https://doi.org/10.1109/ACCESS.2019.2954459.

[44] M. M. Ramadhan, I. S. Sitanggang, F. R. Nasution, and A. Ghifari, “Parameter Tuning in Random Forest Based on Grid Search Method for Gender Classification Based on Voice Frequency,” DEStech Transactions on Computer Science and Engineering, 2017, http://dx.doi.org/10.12783/dtcse/cece2017/14611.

[45] D. G. Vutetakis, “Replacement of Human Operator with Vision-Guided Robot for Electronic Component Pick-And-Place Work Cell,” The University of North Carolina at Charlotte ProQuest Dissertations & Theses, 2016, https://www.proquest.com/openview/d382bbf661e22397fec30eade4a05d42/1?pq-origsite=gscholar&cbl=18750.

[46] S. Cao, I. Parviziomran, H. Yang, S. Park, and D. Won, “Prediction of Component Shifts in Pick and Place Process of Surface Mount Technology Using Support Vector Regression,” Procedia Manufacturing, vol. 39, pp. 210–217, 2019, https://doi.org/10.1016/j.promfg.2020.01.316.

[47] T. E. F. Witte, M. Schmettow, and M. Groenier, “Diagnostic Requirements for Efficient, Adaptive Robotic Surgery Training,” Adaptive Instructional Systems, vol. 11597, pp. 469–481, 2019, https://doi.org/10.1007/978-3-030-22341-0_37.

[48] R. Yang, Z. Liu, Y. Zhu, L. Cong and L. Cui, "Research on Force Control Strategy for Spinal Surgery Robots Based on Adaptive Impedance and Virtual Stiffness," 2024 IEEE 4th International Conference on Power, Electronics and Computer Applications (ICPECA), pp. 212-217, 2024, https://doi.org/10.1109/ICPECA60615.2024.10470943.

[49] E. Battaglia, J. Boehm, Y. Zheng, A. R. Jamieson, J. Gahan, and A. Majewicz Fey, “Rethinking Autonomous Surgery: Focusing on Enhancement over Autonomy,” European Urology Focus, vol. 7, no. 4, pp. 696–705, 2021, https://doi.org/10.1016/j.euf.2021.06.009.

[50] M. Ershad, R. Rege and A. M. Fey, "Adaptive Surgical Robotic Training Using Real-Time Stylistic Behavior Feedback Through Haptic Cues," IEEE Transactions on Medical Robotics and Bionics, vol. 3, no. 4, pp. 959-969, 2021, https://doi.org/10.1109/TMRB.2021.3124128.

[51] Y. Song et al., “Multivariate linear regression model for source apportionment and health risk assessment of heavy metals from different environmental media,” Ecotoxicology and Environmental Safety, vol. 165, pp. 555–563, 2018, https://doi.org/10.1016/j.ecoenv.2018.09.049.

[52] G. Hesamian, F. Torkian, A. Johannssen, and N. Chukhrova, “A learning system-based soft multiple linear regression model,” Intelligent Systems with Applications, vol. 22, p. 200378, 2024, https://doi.org/10.1016/j.iswa.2024.200378.

[53] A. Bashar, “Survey on Evolving Deep Learning Neural Network Architectures,” Article in Journal of Artificial Intelligence and Capsule Networks, vol. 1, no. 2, pp. 73-82, 2019, http://dx.doi.org/10.36548/jaicn.2019.2.003.

[54] K. Serbest, M. T. Ozkan, and M. Cilli, “Estimation of joint torques using an artificial neural network model based on kinematic and anthropometric data,” Neural Computing and Applications, vol. 35, no. 17, pp. 12513–12529, 2023, https://doi.org/10.1007/s00521-023-08379-2.

[55] B. Xiong et al., "Intelligent Prediction of Human Lower Extremity Joint Moment: An Artificial Neural Network Approach," IEEE Access, vol. 7, pp. 29973-29980, 2019, https://doi.org/10.1109/ACCESS.2019.2900591.

[56] W. S. Alaloul and A. H. Qureshi, “Data Processing Using Artificial Neural Networks,” Dynamic Data Assimilation - Beating the Uncertainties, 2020, http://dx.doi.org/10.5772/intechopen.91935.

[57] S. Cao and J. Xiao, "A General Method for Autonomous Assembly of Arbitrary Parts in the Presence of Uncertainty," 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 10259-10266, 2022, https://doi.org/10.1109/IROS47612.2022.9981276.

[58] Q. Gao, J. Zhao and M. Wang, "Research of peg - in - hole assembly for a redundant dual-arm robot based on neural networks," 2017 IEEE International Conference on Mechatronics and Automation (ICMA), pp. 252-257, 2017, https://doi.org/10.1109/ICMA.2017.8015823.

[59] P. Bobka et al., “Development of an automated assembly process supported with an artificial neural network,” Journal of Machine Engineering, vol. 18, no. 3, pp. 28–41, 2018, https://doi.org/10.5604/01.3001.0012.4605.

[60] J. L. Navarro Gonzalez, L. Juarez Ismael and O. Hernandez Keny, "On-Line Incremental Learning for Unknown Conditions during Assembly Operations with Robots," 2013 12th International Conference on Machine Learning and Applications, pp. 28-33, 2013, https://doi.org/10.1109/ICMLA.2013.101.

[61] H. Guan, "Analysis on Deep Reinforcement Learning in Industrial Robotic Arm," 2020 International Conference on Intelligent Computing and Human-Computer Interaction (ICHCI), pp. 426-430, 2020, https://doi.org/10.1109/ICHCI51889.2020.00094.

[62] T. Liu, Z. Zheng, H. Li, K. Bian, and L. Song, “Playing cARD-based RTS games with deep reinforcement learning,” IJCAI International Joint Conference on Artificial Intelligence, pp. 4540-4546, 2019, https://doi.org/10.24963/ijcai.2019/631.

[63] C. J. Lin, J. Y. Jhang, C. L. Lee, H. Y. Lin, and K. Y. Young, “Using a Reinforcement Q-Learning-Based Deep Neural Network for Playing Video Games,” Electronics, vol. 8, no. 10, p. 1128, 2019, https://doi.org/10.3390/electronics8101128.

[64] J. Luo, E. Solowjow, C. Wen, J. A. Ojea and A. M. Agogino, "Deep Reinforcement Learning for Robotic Assembly of Mixed Deformable and Rigid Objects," 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 2062-2069, 2018, https://doi.org/10.1109/IROS.2018.8594353.

[65] J. Luo et al., "SERL: A Software Suite for Sample-Efficient Robotic Reinforcement Learning," 2024 IEEE International Conference on Robotics and Automation (ICRA), pp. 16961-16969, 2024, https://doi.org/10.1109/ICRA57147.2024.10610040

[66] G. Schoettler, A. Nair, J. A. Ojea, S. Levine and E. Solowjow, "Meta-Reinforcement Learning for Robotic Industrial Insertion Tasks," 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 9728-9735, 2020, https://doi.org/10.1109/IROS45743.2020.9340848.

[67] X. Zhu, X. Zheng, Q. Zhang, Z. Chen, Y. Liu and B. Liang, "Natural Residual Reinforcement Learning for Bicycle Robot Control," 2021 IEEE International Conference on Mechatronics and Automation (ICMA), pp. 1201-1206, 2021, https://doi.org/10.1109/ICMA52036.2021.9512587.

[68] J. Luo et al., "Reinforcement Learning on Variable Impedance Controller for High-Precision Robotic Assembly," 2019 International Conference on Robotics and Automation (ICRA), pp. 3080-3087, 2019, https://doi.org/10.1109/ICRA.2019.8793506.

[69] D. Xiang, “Reinforcement learning in autonomous driving,” Applied and Computational Engineering, vol. 48, no. 1, pp. 17–23, 2024, https://doi.org/10.54254/2755-2721/48/20241072.

[70] J. Liao, T. Liu, X. Tang, X. Mu, B. Huang and D. Cao, "Decision-Making Strategy on Highway for Autonomous Vehicles Using Deep Reinforcement Learning," IEEE Access, vol. 8, pp. 177804-177814, 2020, https://doi.org/10.1109/ACCESS.2020.3022755.

[71] Z. Wang, B. Huang, S. Tu, K. Zhang, and L. Xu, “DeepTrader: A Deep Reinforcement Learning Approach for Risk-Return Balanced Portfolio Management with Market Conditions Embedding,” Proceedings of the AAAI Conference on Artificial Intelligence, vol. 35, no. 1, pp. 643–650, 2021, https://doi.org/10.1609/aaai.v35i1.16144.

[72] B. Hambly, R. Xu, and H. Yang, “Recent Advances in Reinforcement Learning in Finance,” Mathematical Finance, vol. 33, no. 3, pp. 437–503, 2021, https://doi.org/10.13140/RG.2.2.30278.40002.

[73] M. Corazza, G. Fasano, R. Gusso, and R. Pesenti, “A Comparison among Reinforcement Learning Algorithms in Financial Trading Systems,” SSRN Electronic Journal, 2020, https://doi.org/10.2139/SSRN.3522712.

[74] J. Bös, A. Wahrburg and K. D. Listmann, "Iteratively Learned and Temporally Scaled Force Control with application to robotic assembly in unstructured environments," 2017 IEEE International Conference on Robotics and Automation (ICRA), pp. 3000-3007, 2017, https://doi.org/10.1109/ICRA.2017.7989344.

[75] M. Böker, M. Joos and T. Hufnagel, "An Advanced Human-inspired Compliant Peg-in-hole Solution for the Industrial Assembly of Almost Arbitrarily Shaped Lithium-ion Battery Packs," 2022 10th International Conference on Control, Mechatronics and Automation (ICCMA), pp. 222-230, 2022, https://doi.org/10.1109/ICCMA56665.2022.10011465.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Ting Sy Horng Terence

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

About the JournalJournal PoliciesAuthor Information

International Journal of Robotics and Control Systems
e-ISSN: 2775-2658
Website: https://pubs2.ascee.org/index.php/IJRCS
Email: ijrcs@ascee.org
Organized by: Association for Scientific Computing Electronics and Engineering (ASCEE), Peneliti Teknologi Teknik Indonesia, Department of Electrical Engineering, Universitas Ahmad Dahlan and Kuliah Teknik Elektro
Published by: Association for Scientific Computing Electronics and Engineering (ASCEE)
Office: Jalan Janti, Karangjambe 130B, Banguntapan, Bantul, Daerah Istimewa Yogyakarta, Indonesia