Simulation and Modeling with Designing for the Proportional, Integral and Derivative Control of Industrial Robotic Arm by Using MATLAB/Simulink
(1) * Salam Waley Shneen Mail (University of Technology-Iraq, Iraq)
(2) Hasan H. Juhi Mail (University of Technology, Iraq)
(3) Hiba Ali Najim Mail (University of Technology, Iraq)
*corresponding author

Abstract


This study aims to develop a control system for a robot arm, designed to perform precise movements along a predefined path, suitable for various industrial applications. The robot arm's movements are driven by three electric motors, each responsible for controlling a joint, enabling the arm to follow the required path accurately. To manage the complexity of multiple motors and dynamic movement requirements, an automated control system has been developed, tailored to meet the specific demands of the proposed task. A highly efficient, reliable, and safe control system design is being developed and simulated to evaluate its effectiveness in executing the required path. A simulation model is being constructed to assess the system's ability to follow the prescribed path, its responsiveness to disturbances and transient conditions, and the overall accuracy of the arm's movements. Simulation results will be analyzed to determine the system's performance across various scenarios, evaluating its adaptability to the work environment and its ability to achieve tasks with high accuracy, thereby enhancing system effectiveness.

Keywords


Robotic Arm; DCM; PID Controller; Open Loop System; Close Loop System; Transfer Function; One position at Different Angles; Multi position at Different Angles

   

DOI

https://doi.org/10.31763/ijrcs.v4i4.1581 		      

Article metrics

10.31763/ijrcs.v4i4.1581 Abstract views : 49 | PDF views : 17

   

Cite

How to cite item
   

Full Text

Download

References


[1] R. Chotikunnan, K. Roongprasert, P. Chotikunnan, P. Imura, M. Sangworasil, A. Srisiriwat, “Robotic Arm Design and Control Using MATLAB/Simulink,” International Journal of Membrane Science and Technology, vol. 10, no. 3, pp. 2448-2459, 2023, https://www.cosmosscholars.com/phms/index.php/ijmst/article/view/1974/1275.

[2] J. A. G. L. Junior, J. M. Balthazar, M. A. Ribeiro, F. C. Janzen, A. M. Tusset, “Dynamic model of a robotic manipulator with one degree of freedom with friction component,” International Journal of Robotics and Control Systems, vol. 3, no. 2, pp. 315-329, 2023, https://doi.org/10.31763/ijrcs.v3i2.984.

[3] F. Ahmmed, “Arduino-Controlled Multi-Function Robot with Bluetooth and nRF24L01+ Communication,” International Journal of Robotics and Control Systems, vol. 4, no. 3, pp. 1353-1381, 2024, https://doi.org/10.31763/ijrcs.v4i3.1517.

[4] D. Prasetiyo and W. S. Aji, “Irrigation Sluice Control System Using Algorithm Based DC Motor PID And Omron PLC,” Control Systems and Optimization Letters, vol. 1, no. 1, pp. 19-26, 2023, https://doi.org/10.59247/csol.v1i1.5.

[5] Z. B. Abdullah, S. H. Dakheel, and S. W. Shneen, “Simulation model of using ANN and PID controller for 2Ph-HSM by matlab,” AIP Conference Proceedings, vol. 3002, no. 1, p. 050004, 2024, https://doi.org/10.1063/5.0206748.

[6] V. K. Munagala and R. K. Jatoth, “A novel approach for controlling DC motor speed using NARXnet based FOPID controller,” Evolving Systems, vol. 14, no. 1, pp. 101–116, 2023, https://doi.org/10.1007/s12530-022-09437-1.

[7] S. W. Shneen, A. L. Shuraiji, K. R. Hameed, “Simulation model of proportional integral controller-PWM DC-DC power converter for DC motor using matlab,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 29, no. 2, pp. 725-734, 2023, http://doi.org/10.11591/ijeecs.v29.i2.pp725-734.

[8] D. Saputra, A. Ma’arif, H. Maghfiroh, P. Chotikunnan, S. N. Rahmadhia, “Design and application of PLC-based speed control for DC motor using PID with identification system and MATLAB tuner,” International Journal of Robotics and Control Systems, vol. 3, no. 2, pp. 233-244, 2023, https://doi.org/10.31763/ijrcs.v3i2.775.

[9] J. Laarni, H. Koskinen, and A. Väätänen, “Concept of operations as a boundary object for knowledge sharing in the design of robotic swarms,” International Journal of Robotics and Control Systems, vol. 2, no. 4, pp. 692-708, 2022, https://doi.org/10.31763/ijrcs.v2i4.834.

[10] J. Mellado and F. Núñez, “Design of an IoT-PLC: A containerized programmable logical controller for the industry 4.0,” Journal of Industrial Information Integration, vol. 25, p. 100250, 2022, https://doi.org/10.1016/j.jii.2021.100250.

[11] S. W. Shneen, H. S. Dakheel, and Z. B. Abdullah, “Design and Implementation of No Load, Constant and Variable Load for DC Servo Motor,” Journal of Robotics and Control (JRC), vol. 4, no. 3, pp. 323-329, 2023, https://doi.org/10.18196/jrc.v4i3.17387.

[12] S. S. Khairullah and A. N. Sharkawy, “Design and Implementation of a Reliable and Secure Controller for Smart Home Applications Based on PLC,” Journal of Robotics and Control (JRC), vol. 3, no. 5, pp. 614–621, 2022, https://doi.org/10.18196/jrc.v3i5.15972.

[13] A. Rajagukguk, W. Arafanaldy, A. Anhar, and N. Nurhalim, “Pitch Blade Control Prototype Design for Vertical Axis Wind Power Plant,” Jurnal Ilmiah Teknik Elektro Komputer dan Informatika, vol. 8, no. 1, pp. 157–166, 2022, https://doi.org/10.26555/jiteki.v8i1.23662.

[14] P. Sutyasadi, “Control Improvement of Low-Cost Cast Aluminium Robotic Arm Using Arduino Based Computed Torque Control,” Jurnal Ilmiah Teknik Elektro Komputer dan Informatika, vol. 8, no. 4, pp. 650–659, 2022, https://doi.org/10.26555/jiteki.v8i4.24646.

[15] H. S. Dakheel, Z. B. Abdullah, and S. W. Shneen, “Advanced optimal GA-PID controller for BLDC motor,” Bulletin of Electrical Engineering and Informatics, vol. 12, no. 4, pp. 2077-2086, 2023, https://doi.org/10.11591/eei.v12i4.4649.

[16] A. U. Nisa, S. Samo, R. A. Nizamani, A. Irfan, Z. Anjum, L. Kumar, “Design and Implementation of Force Sensation and Feedback Systems for Telepresence Robotic Arm,” Journal of Robotics and Control (JRC), vol. 3, no. 5, pp. 710-715, 2022, https://doi.org/10.18196/jrc.v3i5.15959.

[17] A. Kherkhar, Y. Chiba, A. Tlemçani, and H. Mamur, “Thermal investigation of a thermoelectric cooler based on Arduino and PID control approach,” Case Studies in Thermal Engineering, vol. 36, p. 102249, 2022, https://doi.org/10.1016/j.csite.2022.102249.

[18] Z. B. Abdullah, S. W. Shneen, H. S. Dakheel, “Simulation model of PID controller for DC servo motor at variable and constant speed by using MATLAB,” Journal of Robotics and Control (JRC), vol. 4, no. 1, pp. 54-59, 2023, https://doi.org/10.18196/jrc.v4i1.15866.

[19] I. J. Meem, S. Osman, K. M. H. Bashar, N. I. Tushar, R. Khan, “Semi Wireless Underwater Rescue Drone with Robotic Arm,” Journal of Robotics and Control (JRC), vol. 3, no. 4, pp. 496-504, 2022, https://doi.org/10.18196/jrc.v3i4.14867.

[20] A. J. Attiya, S. W. Shneen, B. A. Abbas, Y. Wenyu, “Variable speed control using fuzzy-pid controller for two-phase hybrid stepping motor in robotic grinding,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 3, no. 1, pp. 102-118, 2016, http://doi.org/10.11591/ijeecs.v3.i1.pp102-118.

[21] E. S. Ghith, F. A. A. Tolba, “Design and Optimization of PID Controller using Various Algorithms for Micro-Robotics System,” Journal of Robotics and Control (JRC), vol. 3, no. 3, pp. 244-256, 2022, https://doi.org/10.18196/jrc.v3i3.14827.

[22] L. Yang, N. Guo, R. Sakamoto, N. Kato, K. Yano, “Electric wheelchair hybrid operating system coordinated with working range of a robotic arm,” Journal of Robotics and Control (JRC), vol. 3, no. 5, pp. 679-689, 2022, https://doi.org/10.18196/jrc.v3i5.15944.

[23] G. A. Aziz, S. W. Shneen, F. N. Abdullah, D. H. Shaker, “Advanced optimal GWO-PID controller for DC motor,” International Journal of Advances in Applied Sciences, vol. 11, no. 3, pp. 263-276, 2022, http://doi.org/10.11591/ijaas.v11.i3.pp263-276.

[24] M. Filo, S. Kumar, and M. Khammash, “A hierarchy of biomolecular proportional-integral-derivative feedback controllers for robust perfect adaptation and dynamic performance,” Nature Communications, vol. 13, no. 1, pp. 1–19, 2022, https://doi.org/10.1038/s41467-022-29640-7.

[25] S. Müftü, Said, and Barış Gökçe, “Design and Implementation of an Optimized PID Controller for Two-Limb Robot Arm Control,” Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, vol. 13, no. 1, pp. 192-204, https://doi.org/10.17798/bitlisfen.1370223.

[26] A. L. Shuraiji, and S. W. Shneen, “Fuzzy Logic Control and PID Controller for Brushless Permanent Magnetic Direct Current Motor: A Comparative Study,” Journal of Robotics and Control (JRC), vol. 3, no. 6, pp. 762-768, 2022, https://doi.org/10.18196/jrc.v3i6.15974.

[27] E. S. Rahayu, A. Ma’arif, and A. Cakan, “Particle swarm optimization (PSO) tuning of PID control on DC motor,” International Journal of Robotics and Control Systems, vol. 2, no. 2, pp. 435-447, 2022, https://doi.org/10.31763/ijrcs.v2i2.476.

[28] M. G. Mohanan, and A. Salgaonkar, “Robotic motion planning in dynamic environments and its applications,” International Journal of Robotics and Control Systems, vol. 2, vol. 4, pp. 666-691, 2022, https://doi.org/10.31763/ijrcs.v2i4.816.

[29] F. N. Abdullah, G. A. Aziz, and S. W. Shneen, “Simulation model of servo motor by using matlab,” Journal of Robotics and Control (JRC), vol. 3, no. 2, pp. 176-179, 2022, https://doi.org/10.18196/jrc.v3i2.13959.

[30] J. Możaryn, J. Petryszyn, and S. Ozana, “PLC based fractional-order PID temperature control in pipeline: design procedure and experimental evaluation,” Meccanica, vol. 56, no. 4, pp. 855–871, 2021, https://doi.org/10.1007/s11012-020-01215-0.

[31] A. Setiawan and A. Ma’arif, “Stirring System Design for Automatic Coffee Maker Using OMRON PLC and PID Control,” International Journal of Robotics and Control Systems, vol. 1, no. 3, pp. 390-401, 2021, https://doi.org/10.31763/ijrcs.v1i3.457.

[32] H. S. Dakheel, Z. B. Abdullah, N. S. Jasim, S. W. Shneen, “Simulation model of ANN and PID controller for direct current servo motor by using Matlab/Simulink,” TELKOMNIKA (Telecommunication Computing Electronics and Control), vol. 20, no. 4, pp. 922-932, 2022, http://doi.org/10.12928/telkomnika.v20i4.23248.

[33] G. Gabor and G. Livint, "Implementation of a PID Controller Using Siemens PLC," 2022 International Conference and Exposition on Electrical And Power Engineering (EPE), pp. 593-596, 2022, https://doi.org/10.1109/EPE56121.2022.9959869.

[34] K. Vanchinathan and N. Selvaganesan, “Adaptive fractional order PID controller tuning for brushless DC motor using Artificial Bee Colony algorithm,” Results in Control and Optimization, vol. 4, p. 100032, 2021, https://doi.org/10.1016/j.rico.2021.100032.

[35] O. J. Tola, E. A. Umoh, E. A. Yahaya, “Pulse Width Modulation Analysis of Five-Level Inverter-Fed Permanent Magnet Synchronous Motors for Electric Vehicle Applications,” International Journal of Robotics and Control Systems, vol. 1, no. 4, pp. 477-487, 2021, https://doi.org/10.31763/ijrcs.v1i4.483.

[36] M. A. Shamseldin, R. Barbosa, and I. Jesus, “Optimal Coronavirus Optimization Algorithm Based PID Controller for High Performance Brushless DC Motor,” Algorithms, vol. 14, no. 7, p. 193, 2021, https://doi.org/10.3390/a14070193.

[37] G. R. Wicaksono and R. D. Puriyanto, “Programmable Logic Controller (PLC) Based Paint Viscosity Control System,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 3, no. 1, pp. 1-9, 2021, https://doi.org/10.12928/biste.v3i1.1109.

[38] M. Khalifa, A. H. Amhedb, and M. A. Sharqawi, “Position Control of Real Time DC Motor Using LabVIEW,” Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 342–348, 2021, https://doi.org/10.18196/jrc.25104.

[39] P. B. D. M. Oliveira, J. D. Hedengren, and E. J. S. Pires, “Swarm-Based Design of Proportional Integral and Derivative Controllers Using a Compromise Cost Function: An Arduino Temperature Laboratory Case Study,” Algorithms, vol. 13, no. 12, p. 315, 2020, https://doi.org/10.3390/a13120315.

[40] A. Ma’arif, I. Cahyadi, S. Herdjunanto, and O. Wahyunggoro, “Tracking Control of High Order Input Reference Using Integrals State Feedback and Coefficient Diagram Method Tuning,” IEEE Access, vol. 8, pp. 182731–182741, 2020, https://doi.org/10.1109/ACCESS.2020.3029115.

[41] B. N. Kommula and V. R. Kota, “Direct instantaneous torque control of Brushless DC motor using firefly Algorithm based fractional order PID controller,” Journal of King Saud University - Engineering Sciences, vol. 32, no. 2, pp. 133–140, 2020, https://doi.org/10.1016/j.jksues.2018.04.007.

[42] E. W. Suseno, and A. Ma'arif, “Tuning of PID controller parameters with genetic algorithm method on DC motor,” International Journal of Robotics and Control Systems, vo1. 1, no. 1, pp. 41-53, 2021, https://doi.org/10.31763/ijrcs.v1i1.249.

[43] M. F. A. Andzar and R. D. Puriyanto, “PID Control for Temperature and Motor Speed Based on PLC,” Signal and Image Processing Letters, vol. 1, no. 1, pp. 7-13, 2019, https://doi.org/10.31763/simple.v1i1.150.

[44] S. W. Jeaeb, A. Z. Salman, Q. A. Jawad, H. Shareef, “Advanced optimal by PSO-PI for DC motor,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 16, no. 1, pp. 165-175, 2019, http://doi.org/10.11591/ijeecs.v16.i1.pp165-175.

[45] D. Potnuru, K. Alice Mary, and C. Sai Babu, “Experimental implementation of Flower Pollination Algorithm for speed controller of a BLDC motor,” Ain Shams Engineering Journal, vol. 10, no. 2, pp. 287–295, 2019, https://doi.org/10.1016/j.asej.2018.07.005.

[46] B. Hekimoğlu, “Optimal Tuning of Fractional Order PID Controller for DC Motor Speed Control via Chaotic Atom Search Optimization Algorithm,” EEE Access, vol. 7, pp. 38100-38114, 2019, https://doi.org/10.1109/ACCESS.2019.2905961.

[47] S. Waley, C. Mao, and N. K. Bachache, “Biogeography based optimization for tuning FLC controller of PMSM,” Advances in Swarm and Computational Intelligence, pp. 395-402, 2015, https://doi.org/10.1007/978-3-319-20466-6_42.

[48] M. S. Chehadeh and I. Boiko, “Design of rules for in-flight non-parametric tuning of PID controllers for unmanned aerial vehicles,” Journal of the Franklin Institute, vol. 356, no. 1, pp. 474-491, 2019, https://doi.org/10.1016/j.jfranklin.2018.10.015.

[49] A. Maarif, A. I. Cahyadi, S. Herdjunanto, Iswanto, Y. Yamamoto, “Tracking Control of Higher Order Reference Signal Using Integrators and State Feedback,” IAENG International Journal of Computer Science, vol. 46, no. 2, pp. 208-216, 2019, https://www.iaeng.org/IJCS/issues_v46/issue_2/IJCS_46_2_09.pdf.

[50] H. S. Dakheel, Z. B. Abdullah, and S. W. Shneen, “Simulation model of FLC-PID based speed control system for DC motor drive by using matlab,” AIP Conference Proceedings, vol. 3002, no. 1, 2024, https://doi.org/10.1063/5.0206580.

[51] A. M. Zaki, M. El-Bardini, F. A. S. Soliman, and M. M. Sharaf, “Embedded two level direct adaptive fuzzy controller for DC motor speed control,” Ain Shams Engineering Journal, vol. 9, no. 1, pp. 65–75, 2018, https://doi.org/10.1016/j.asej.2015.10.003.

[52] I. D. Kurniasari and A. Ma'arif, “Implementing PID-Kalman Algorithm to Reduce Noise in DC Motor Rotational Speed Control,” International Journal of Robotics and Control Systems, vol. 4, no. 2, pp. 958-978, 2024, https://doi.org/10.31763/ijrcs.v4i2.1309.

[53] A. Ma’arif, A. I. Cahyadi, and O. Wahyunggoro, “CDM Based Servo State Feedback Controller with Feedback Linearization for Magnetic Levitation Ball System,” International Journal on Advanced Science, Engineering and Information Technology, vol. 8, no. 3, pp. 930–937, 2018, https://doi.org/10.18517/ijaseit.8.3.1218.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 salam waley shneen, Hasan H. Juhi, Hiba Ali Najim

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

About the JournalJournal PoliciesAuthor Information

International Journal of Robotics and Control Systems
e-ISSN: 2775-2658
Website: https://pubs2.ascee.org/index.php/IJRCS
Email: ijrcs@ascee.org
Organized by: Association for Scientific Computing Electronics and Engineering (ASCEE), Peneliti Teknologi Teknik Indonesia, Department of Electrical Engineering, Universitas Ahmad Dahlan and Kuliah Teknik Elektro
Published by: Association for Scientific Computing Electronics and Engineering (ASCEE)
Office: Jalan Janti, Karangjambe 130B, Banguntapan, Bantul, Daerah Istimewa Yogyakarta, Indonesia