(Concordia University, Canada)(2) Jake Scoggin
(University of Connecticut, United States)(3) Stephen Oonk
(American GNC Corporation, United States)(4) Francisco Maldonado
(American GNC Corporation, United States)*corresponding author
AbstractWe have developed and experimentally tested a set of models for the detection and identification of sensor faults that commonly occur in wireless sensor networks. Considered faults include outlier, spike, variance, high-frequency noise, offset, gain, and drift faults. These faults affect the system operations and can endanger operators, final users, and the general public. The fault detection models are divided into two classes: data-centric models, which only analyze a single data stream, and system-centric models, which consider the overall system. For data-centric models, we use the magnitude, the gradient, and the variance of raw sensor data to model faults. For system-centric models, we introduce variogram-based techniques that allow faults to be detected by comparing readings from multiple sensors that measure related phenomena. For data-centric and system-centric sensor fault detection, we show how a few model parameters affect the sensitivity of wireless sensor network fault models. We present simulation and experimental results that illustrate the fault detection and identification models. The system is intended for health monitoring applications of the NASA Stennis Space Center (SSC) test stands and widely distributed support systems, including pressurized gas lines, propellant delivery systems, and water coolant lines. The testbed consists of Coremicro® reconfigurable embedded smart sensor nodes [29] capable of wireless communication, a network-capable application processor, a wireless base station, the software that supports sensor and actuator health monitoring, a database server, and a smartphone running a health monitoring Android application. KeywordsFault detection; Wireless sensor networks; Sensor faults
|
DOIhttps://doi.org/10.31763/ijrcs.v3i4.1136 |
Article metrics10.31763/ijrcs.v3i4.1136 Abstract views : 783 | PDF views : 191 |
Cite |
Full Text Download
|
References
[1] K. Ni, N. Ramanathan, M. N. H. Chehade, L. Balzano, S. Nair, S. Zahedi, G. Pottie, M. Hansen, M. Srivastava, and E. Kohler, “Sensor network data fault types,” ACM, vol. 5, no. 3, pp. 1–29, 2009, https://doi.org/10.1145/1525856.1525863.
[2] M. Russell, G. Lecakes, S. Mandayam, and S. Jensen, “The intelligent valve: A diagnostic framework for integrated system-health management of a rocket-engine test stand,” IEEE Transactions on Instrumentation and Measurement, vol. 60, no. 4, pp. 1489–1497, 2011, https://doi.org/10.1109/TIM.2010.2101350.
[3] G. Kaur, P. Chanak and M. Bhattacharya, “Obstacle-Aware Intelligent Fault Detection Scheme for Industrial Wireless Sensor Networks,” IEEE Transactions on Industrial Informatics, vol. 18, no. 10, pp. 6876–6886, 2022, https://doi.org/10.1109/TII.2021.3133347.
[4] W. Wu, X. Cheng, M. Ding, K. Xing, F. Liu, and P. Deng, “Localized outlying and boundary data detection in sensor networks,” IEEE Transactions on Knowledge and Data Engineering, vol. 19, no. 8, pp. 1145–1157, 2011, https://doi.org/10.1109/TKDE.2007.1067.
[5] L. Bettencourt, A. Hagberg, and L. Larkey, “Separating the wheat from the chaff: Practical anomaly detection schemes in ecological applications of distributed sensor networks,” in Proceedings of the IEEE International Conference on Distributed Computing in Sensor Systems, 2007, https://doi.org/10.1007/978-3-540-73090-315.
[6] S. Rajasegarar, C. Leckie, M. Palaniswami, and J. Bezdek, “Quarter sphere based distributed anomaly detection in wireless sensor networks,” in Proceedings of the IEEE International Conference on Communications, 2007, https://doi.org/10.1109/ICC.2007.637.
[7] M. S. Mohamed and T. Kavitha, “Outlier detection using support vector machine in wireless sensor network real-time data,” International Journal of Soft Computing and Engineering, vol. 1, no. 2, pp. 68–72, 2011, https://www.ijsce.org/portfolio-item/a035041211/.
[8] S. Zidi, T. Moulahi, and B. Alaya, “Fault detection in wireless sensor networks through SVM classifier,” IEEE Sensors Journal, vol. 18, no. 1, pp. 340–347, 2018, https://doi.org/10.1109/JSEN.2017.2771226.
[9] J. W. Branch, C. Giannella, B. Szymanski, R. Wolff, and H. Kargupta, “In-network outlier detection in wireless sensor networks,” in Knowledge and Information Systems, vol. 34, pp. 23–54, 2013, https://doi.org/10.1007/s10115-011-0474-5.
[10] K. Zhang, S. SHi, H. Gao, and J. Li, “Unsupervised outlier detection in sensor networks using aggregation tree,” in Proceedings of Advanced Data Mining and Applications, 2007, https://doi.org/10.1007/978-3-540-73871-8.
[11] S. Rajasegarar, C. Leckie, M. Palaniswami, and J. Bezdek, “Distributed anomaly detection in wireless sensor networks,” in Proceedings of the IEEE International Conference on Communication Systems, 2006, https://doi.org/10.1109/ICCS.2006.301508.
[12] J. Gupchup, A. Terzis, R. Burns, and A. Szalay, “Model-based event detection in wireless sensor networks,” Computing Research Repository, vol. abs/0901.3923, 2009, https://doi.org/10.48550/arXiv.0901.3923.
[13] Y. Wang, S. Parthasarathy, and S. Tatikonda, “Locality sensitive outlier detection: A ranking driven approach,” in Proceedings of the 27th IEEE International Conference on Data Engineering, 2011, pp. 410–421, https://doi.org/10.1109/ICDE.2011.5767852.
[14] G. Jin and S. Nittel, “Ned: An efficient noise-tolerant event and event boundary detection algorithm in wireless sensor networks,” in Proceedings of the 7th International Conference on Data Management, 2006, pp. 153–153, https://doi.org/10.1109/MDM.2006.110.
[15] X. Luo, M. Dong, and Y. Huang, “On distributed fault-tolerant detection in wireless sensor networks,” IEEE Transactions on Computers, vol. 55, no. 1, pp. 58–70, 2006, https://doi.org/10.1109/TC.2006.13.
[16] S. Kar, R. Tandon, H. Poor, and S. Cui, “Distributed detection in noisy sensor networks,” in Proceedings of the IEEE International Symposium on Information Theory, 2011, pp. 2856–2860, https://doi.org/10.1109/ISIT.2011.6034097.
[17] H.-T. Pai, J.-T. Sung, and Y. S. Han, “Adaptive retransmission with balanced load for fault-tolerant distributed detection in wireless sensor networks,” Journal of Information Science and Engineering, vol. 23, pp. 1141–1154, 2007, https://jise.iis.sinica.edu.tw/JISESearch/pages/View/PaperView.jsf?keyId=49 845.
[18] T.-Y. Wang, L.-Y. Chang, D.-R. Duh, and J.-Y. Wu, “Fault-tolerant decision fusion via collaborative sensor fault detection in wireless sensor networks,” IEEE Transactions on Wireless Communications, vol. 7, no. 2, pp. 756–768, 2008, https://doi.org/10.1109/TWC.2008.060653.
[19] S. H. Oh, C. O. Hong, and Y.-H. Choi, “A malicious and malfunctioning node detection scheme for wireless sensor networks,” Wireless Sensor Network, vol. 4, no. 3, pp. 84–90, 2012, https://doi.org/10.4236/wsn.2012.43012.
[20] V. Bychkovskiy, S. Megerian, D. Estrin, and M. Potkonjak, “A collaborative approach to in-place sensor calibration,” in Proceedings of the Second International Workshop on Information Processing in Sensor Networks (IPSN), pp. 301–316,2003, https://doi.org/10.1007/3-540-36978-3_20.
[21] M. M. Gharamaleki and S. Babaie, “A new distributed fault detection method for wireless sensor networks,” IEEE Systems Journal, vol. 14, no. 4, pp. 4883–4890, 2020, https://doi.org/10.1109/JSYST.2020.2976827.
[22] P. -Y. Chen, S. Yang and J. A. McCann, “Distributed real-time anomaly detection in networked industrial sensing systems,” IEEE Transactions on Industrial Electronics, vol. 62, no. 6, pp. 3832–3842, 2015, https://doi.org/10.1109/TIE.2014.2350451.
[23] L. Balzano and R. Nowak, “Blind calibration of networks of sensors: Theory and algorithms,” in Networked Sensing Information and Control, 2008, pp. 9–37, https://doi.org/10.1007/978-0-387-68845-91.
[24] S. U. Jan, Y. D. Lee, and I. S. Koo, “A distributed sensor-fault detection and diagnosis framework using machine learning,” Inf. Sci., vol. 547, pp. 777–796, 2021, https://doi.org/10.1016/j.ins.2020.08.068.
[25] M. N. Hasan, S. U. Jan, and I. Koo, “Wasserstein GAN-Based Digital Twin-Inspired Model for Early Drift Fault Detection in Wireless Sensor Networks,” IEEE Sensors Journal, vol. 23, no. 12, pp. 13327–13339, 2023, https://doi.org/10.1109/JSEN.2023.3272908.
[26] D. Jana, J. Patil, S. Herkal, S. Nagarajaiah, and L. Duenas-Osorio, “CNN and convolutional autoencoder (CAE) based real-time sensor fault detection localization and correction,” Mech. Syst. Signal Process., vol. 169, 2022, https://doi.org/10.1016/j.ymssp.2021.108723.
[27] F. Figueroa, J. Schmalzel, J. Morris, M. Turowski, and R. Franzl, “Integrated system health management: Pilot operational implementation in a rocket engine test stand,” in Proceedings of the AIAA Infotech@Aerospace 2010, 2010, https://doi.org/10.2514/6.2010-3454.
[28] F. Figueroa, J. Schmalzel, R. Aguilar, M. Shwabacher, and J. Morris, “Integrated system health management (ishm) for test stand and j-2x engine: Core implementation,” in Proceedings of the 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2008, https://doi.org/10.2514/6.2008-5135.
[29] F. Figueroa, J. Schmalzel, M. Walker, M. Venkatesh, R. Kapadia, J. Morris, M. Turowski, and H. Smith, “Integrated system health management: Foundational concepts, approach, and implementation,” NASA Stennis Space Center, Tech. Rep., 2009, https://doi.org/10.2514/6.2009-1915.
[30] F. Figueroa, J. Schmalzel, R. Aguilar, M. Shwabacher, and J. Morris, “Tutorial integrated systems health management (ISHM),” in Proceedings of the NASA/ESA Conference on Adaptive Hardware and Systems (AHS-2011), 2011, https://ntrs.nasa.gov/api/citations/20110012035/downloads/20110012035.pdf.
[31] N. Vosburg, R. Selmic, S. Oonk, and F. Maldonado, “Intelligent distributed and ubiquitous health management system: Data storage and processing,” in Proceedings of the AIAA Infotech@Aerospace, 2013, https://doi.org/10.2514/6.2013-5218.
[32] S. Oonk, F. Maldonado, and T. Politopoulos, “Distributed intelligent health monitoring with the coremicro reconfigurable embedded smart sensor node,” in Proceedings of the International AUTOTESTCON Conference, pp. 233–238, 2012, https://doi.org/10.1109/AUTEST.2012.6334523.
[33] “Coremicro reconfigurable embedded smart sensor node (cre-ssn) product brochure, https://americangnc.com/images/CRE-SSN%20Brochure.pdf, accessed Feb. 2015.” American GNC Corporation, Tech. Rep., 2012.
[34] Y. Ju, G. Wei, D. Ding and S. Liu, “A novel fault detection method under weighted try-once-discard scheduling over sensor networks,” IEEE Transactions on Control of Network Systems, vol. 7, no. 3, pp. 1489–1499, 2020, https://doi.org/10.1109/TCNS.2020.2980362.
[35] C. Han, L. Xu, and G. He, “Mining recent frequent item sets in sliding windows over data streams,” Computing and Informatics, vol. 27, pp. 315–339, 2008, https://www.cai.sk/ojs/index.php/cai/article/view/252.
[36] B. Xu, Y. Guo, L. Wang, and J. Zhang, “A Novel Robust Gaussian Approximate Smoother Based on EM for Cooperative Localization with Sensor Fault and Outliers,” IEEE Transactions on Instrumentation and Measurement, vol. 70, pp. 1–14, 2021, https://doi.org/10.1109/TIM.2020.3034977.
[37] S. Safavi, M. A. Safavi, H. Hamid, and S. Fallah, “Multi-Sensor Fault Detection, Identification, Isolation and Health Forecasting for Autonomous Vehicles,” Sensors, vol. 21, no. 7, p. 2547, 2021, https://doi.org/10.3390/s21072547.
[38] J. M. Rivera-Velazquez, L. Latorre, F. Mailly, and P. Nouet, “A New Algorithm for Fault Tolerance in Redundant Sensor Systems Based on Real-Time Variance Estimation,” IEEE Sensors Journal, vol. 22, no. 15, pp. 15410–15418, 2022, https://doi.org/10.1109/JSEN.2022.3186636.
[39] H. Lee, Y. Kim and C. O. Kim, “A Deep Learning Model for Robust Wafer Fault Monitoring With Sensor Measurement Noise,” IEEE Transactions on Semiconductor Manufacturing, vol. 30, no. 1, pp. 23–31, 2017, https://doi.org/10.1109/TSM.2016.2628865.
[40] C. Attaianese, M. D’Arpino, M. D. Monaco and L. P. Di Noia, “Modeling and Detection of Phase Current Sensor Gain Faults in PMSM Drives,” IEEE Access, vol. 10, pp. 80106–80118, 2022, https://doi.org/10.1109/ACCESS.2022.3195025.
[41] Z. Deng, H. Wang and R. Wang, “An Improved Unscented Kalman Filter for Interrupted and Drift Sensor Faults of Aircrafts,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1–10, 2023, https://doi.org/10.1109/TIM.2023.3235423.
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Rastko R. Selmic
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| About the Journal | Journal Policies | Author | Information |
International Journal of Robotics and Control Systems
e-ISSN: 2775-2658
Website: https://pubs2.ascee.org/index.php/IJRCS
Email: ijrcs@ascee.org
Organized by: Association for Scientific Computing Electronics and Engineering (ASCEE), Peneliti Teknologi Teknik Indonesia, Department of Electrical Engineering, Universitas Ahmad Dahlan and Kuliah Teknik Elektro
Published by: Association for Scientific Computing Electronics and Engineering (ASCEE)
Office: Jalan Janti, Karangjambe 130B, Banguntapan, Bantul, Daerah Istimewa Yogyakarta, Indonesia