(Telkom University, Bandung, West Java, Indonesia)(2) Akhmadi Akhmadi
(Telkom University, Bandung, West Java, Indonesia)(3) Arini Arumsari
(Telkom University, Bandung, West Java, Indonesia)(4) Mahendra Nur Hadiansyah
(Telkom University, Bandung, West Java, Indonesia)(5) Alfito Aji Denandra
(Telkom University, Bandung, West Java, Indonesia)(6) Sarah Nurul Azizah
(Telkom University, Bandung, West Java, Indonesia)*corresponding author
AbstractThere are many alterations and adaptations of the workspaces after the Covid-19 pandemic. Nowadays, workspaces are required to have flexibility in facilitating physical and virtual activities, work-from-home (WFH), and work-from-office (WFO) activities. Besides, workspaces must provide comfort based on user preferences and demand to support workers’ health and productivity. In order to answer these problems, the design of interactive digital devices that can be adjusted according to physical needs, activities, and preferences is needed to support the ideal workspace comfort. The research method used in this research is a literature review related to ideal workspace comfort standards and an assessment of the Arduino as an interactive digital device to produce an interactive digital device method design that can detect ideal comfort and be applied to workspaces. The result shows that as an interactive digital device, Arduino can be implemented in a workspace to detect and produce ideal workspace comfort regarding lighting, noise, temperature, and humidity. Arduino also supports flexibility and varied demand in a workspace because of its adjustable artificial intelligence feature. The ideal standard of workspace differs based on the activities and geographical conditions of the country and is related to the varied preferences of its users. Based on its complexity, for further research to be carried out, it is recommended to conduct a case study of ideal workspace interior design with an Arduino device in a specific place to generate more accurate data and suitable workspace design.
KeywordsWorkspace; Comfort; Flexibility; Interactive Digital Device; Arduino
|
DOIhttps://doi.org/10.31763/viperarts.v5i2.1083 |
Article metrics10.31763/viperarts.v5i2.1083 Abstract views : 410 | PDF views : 168 |
Cite |
Full Text Download
|
References
[1] M. W. Memud and B. Tabibi, “Effective Design of Coworking Spaces to Improve Users’ Experience in Lagos State, Nigeria,” Art Des. Rev., vol. 11, no. 02, pp. 80–103, 2023, doi: 10.4236/adr.2023.112007.
[2] M. Kwon, H. Remøy, and M. Van Den Bogaard, “Influential design factors on occupant satisfaction with indoor environment in workplaces,” Build. Environ., vol. 157, pp. 356–365, Jun. 2019, doi: 10.1016/j.buildenv.2019.05.002.
[3] A. Shukur, N. I. . Hussein, S. R. Kamat, and D. Yuniawan, “A Regression Analysis: Ergonomic Comfort vs. Air Quality, Noise, Lighting and Temperature in the Composite Trimming Process Working Room,” J. Mech. Eng., vol. 18, no. 1, pp. 109–121, Jan. 2021, doi: 10.24191/jmeche.v18i1.15168.
[4] S. Ceylan, “Healthy Workspaces: Strategies for Increasing the Indoor Environmental Quality at Call Centre Interiors for Employee Wellbeing and Productivity,” BUILDER, vol. 284, no. 3, pp. 60–63, Feb. 2021, doi: 10.5604/01.3001.0014.7430.
[5] G. Gomes Zumba, J. Gomes Zumba, and H. Gomes Zumba, “The contribution of the physical space in medical space,” 2023, doi: 10.54941/ahfe1003689.
[6] L. Bergefurt, R. Appel-Meulenbroek, C. Maris, T. Arentze, M. Weijs-Perrée, and Y. De Kort, “The influence of distractions of the home-work environment on mental health during the COVID-19 pandemic,” Ergonomics, vol. 66, no. 1, pp. 16–33, Jan. 2023, doi: 10.1080/00140139.2022.2053590.
[7] J. Shin, “Toward a theory of environmental satisfaction and human comfort: A process-oriented and contextually sensitive theoretical framework,” J. Environ. Psychol., vol. 45, pp. 11–21, Mar. 2016, doi: 10.1016/j.jenvp.2015.11.004.
[8] W.-T. Sung and J.-A. Shih, “Indoor Thermal Comfort Environment Monitoring System Based on Architecture of IoT,” in 2018 International Symposium on Computer, Consumer and Control (IS3C), 2018, pp. 165–168, doi: 10.1109/IS3C.2018.00049.
[9] B. Quintana, K. Vikhorev, and A. Adán, “Workplace occupant comfort monitoring with a multi-sensory and portable autonomous robot,” Build. Environ., vol. 205, p. 108194, Nov. 2021, doi: 10.1016/j.buildenv.2021.108194.
[10] L. M. Gladence, H. H. Sivakumar, G. Venkatesan, and S. S. Priya, “Home and office automation system using human activity recognition,” in 2017 International Conference on Communication and Signal Processing (ICCSP), 2017, pp. 0758–0762, doi: 10.1109/ICCSP.2017.8286463.
[11] Z. Li, J. Li, X. Li, Y. Yang, J. Xiao, and B. Xu, “Design of Office Intelligent Lighting System Based on Arduino,” Procedia Comput. Sci., vol. 166, pp. 134–138, 2020, doi: 10.1016/j.procs.2020.02.035.
[12] O. E. Amestica, P. E. Melin, C. R. Duran-Faundez, and G. R. Lagos, “An Experimental Comparison of Arduino IDE Compatible Platforms for Digital Control and Data Acquisition Applications,” in 2019 IEEE CHILEAN Conference on Electrical, Electronics Engineering, Information and Communication Technologies (CHILECON), 2019, pp. 1–6, doi: 10.1109/CHILECON47746.2019.8986865.
[13] Herzberg, Frederick, Motivation to work. Routledge, 2017. doi: 10.4324/9781315124827
[14] R. Dale, R. Fusaroli, N. D. Duran, and D. C. Richardson, “The Self-Organization of Human Interaction,” in Psychology of Learning and Motivation, vol. 59, Elsevier, 2013, pp. 43–95. doi: 10.1016/B978-0-12-407187-2.00002-2
[15] A. Kitson, M. Prpa, and B. E. Riecke, “Immersive Interactive Technologies for Positive Change: A Scoping Review and Design Considerations,” Front. Psychol., vol. 9, p. 1354, Aug. 2018, doi: 10.3389/fpsyg.2018.01354.
[16] S. Bakker and K. Niemantsverdriet, “The Interaction-Attention Continuum: Considering Various Levels of Human Attention in Interaction Design,” vol. 10, no. 2, pp. 1–14, 2016.
[17] A. A. Masruri and R. Patradhiani, “Faktor Ergonomi Terkait Kenyamanan Ruang Kelas Fakultas Teknik Universitas Muhammadiyah Palembang,” Integr. J. Ilm. Tek. Ind., vol. 4, no. 1, p. 40, Dec. 2019, doi: 10.32502/js.v4i1.2097.
[18] K. Indriyani, I. H. Susilowati, A. Dinar, A. Azwar, and M. Wirawan, “Analysis of Ergonomic Factors Related to the Indoor Health Comfort and Musculoskeletal Symptoms of Office Workers,” KnE Life Sci., vol. 4, no. 5, p. 200, Jun. 2018, doi: 10.18502/kls.v4i5.2553.
[19] D. Cahyadi and A. Kurniawan, “Pengukuran Lingkungan Fisik Kerja dan Workstation di Kantor Pos Pusat Samarinda,” EKSIS Ris., vol. 7, no. 2, pp. 1931–1938, Aug. 2011.
[20] S. Preto and C. C. Gomes, “Lighting in the Workplace: Recommended Illuminance (lux) at Workplace Environs,” in Advances in Design for Inclusion, vol. 776, G. Di Bucchianico, Ed. Cham: Springer International Publishing, 2019, pp. 180–191. doi: 10.1007/978-3-319-94622-1_18
[21] R. S. Saraswati, B. A. Wibawa, and B. E. Saputra, “Optimization of Natural and Artificial Lighting System in UPGRIS Lecturer’s Workspace using Dialux Evo,” IOP Conf. Ser. Earth Environ. Sci., vol. 738, no. 1, p. 012033, Apr. 2021, doi: 10.1088/1755-1315/738/1/012033.
[22] P. E. Dora, “Hubungan arah pencahayaan buatan terhadap kenyamanan dan efisiensi kerja,” Semin. Nas. Dies Jur. Arsit. Univ. Kristen Petra, pp. 1–8, 2012.
[23] N. S. Abdelaziz Mahmoud, G. El Samanoudy, and C. Jung, “Simulating the natural lighting for a physical and mental Well-being in residential building in Dubai, UAE,” Ain Shams Eng. J., vol. 14, no. 1, p. 101810, Feb. 2023, doi: 10.1016/j.asej.2022.101810.
[24] J. M. Katabaro and Y. Yan, “Effects of Lighting Quality on Working Efficiency of Workers in Office Building in Tanzania,” J. Environ. Public Health, vol. 2019, pp. 1–12, Nov. 2019, doi: 10.1155/2019/3476490.
[25] R. Golmohammadi, M. Aliabadi, and T. Nezami, “An Experimental Study of Acoustic Comfort in Open Space Banks Based on Speech Intelligibility and Noise Annoyance Measures,” Arch. Acoust., vol. 42, no. 2, pp. 333–345, Jun. 2017, doi: 10.1515/aoa-2017-0035.
[26] D. Gavhed and A. Toomingas, “Observed physical working conditions in a sample of call centres in Sweden and their relations to directives, recommendations and operators’ comfort and symptoms,” Int. J. Ind. Ergon., vol. 37, no. 9–10, pp. 790–800, Sep. 2007, doi: 10.1016/j.ergon.2007.06.006.
[27] I. V. Owolawi, “Noise Exposure and Its Auditory Effect on Industrial Workers,” Int. J. Otolaryngol. Head & Neck Surg., vol. 10, no. 05, pp. 365–375, 2021, doi: 10.4236/ijohns.2021.105033.
[28] N. Vujica Herzog, B. Buchmeister, and L. Spindler, “Assessment of School and Industrial Noise: Measurements vs Personal Perceptions,” in DAAAM International Scientific Book, 1st ed., vol. 19, B. Katalinic, Ed. DAAAM International Vienna, 2020, pp. 033–048. doi: 10.2507/daaam.scibook.2020.03
[29] D. Gavhed and A. Toomingas, “Observed physical working conditions in a sample of call centres in Sweden and their relations to directives, recommendations and operators’ comfort and symptoms,” Int. J. Ind. Ergon., vol. 37, no. 9–10, pp. 790–800, Sep. 2007, doi: 10.1016/j.ergon.2007.06.006.
[30] A. Chen and V. W.-C. Chang, “Human health and thermal comfort of office workers in Singapore,” Build. Environ., vol. 58, pp. 172–178, Dec. 2012, doi: 10.1016/j.buildenv.2012.07.004.
[31] H. B. Rijal, M. A. Humphreys, and J. F. Nicol, “Behavioural Adaptation for the Thermal Comfort and Energy Saving in Japanese Offices,” J. Inst. Eng., vol. 15, no. 2, pp. 14–25, Jul. 2019, doi: 10.3126/jie.v15i2.27637.
[32] J. Soto Muñoz, M. Trebilcock Kelly, V. Flores-Alés, and R. Ramírez-Vielma, “Understanding the perceived productivity of office occupants in relation to workspace thermal environment,” Build. Res. Inf., vol. 50, no. 1–2, pp. 152–170, Feb. 2022, doi: 10.1080/09613218.2021.1897501.
[33] J. Liu, X. Yang, X. Meng, and Y. Liu, “Effects of Indoor Temperature and Air Movement on Perceived Air Quality in the Natural Ventilated Classrooms,” 2018, p. 275.
[34] C. B. Ramspeck et al., Thermal environmental conditions for human occupancy. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2004.
[35] J. Razjouyan et al., “Wellbuilt for wellbeing: Controlling relative humidity in the workplace matters for our health,” Indoor Air, vol. 30, no. 1, pp. 167–179, Oct. 2019, doi: 10.1111/ina.12618.
[36] D. A. Wulandari and H. S. Pramono, “Pengembangan robot multinavigasi untuk media pembelajaran pada mata pelajaran robotika program keahlian mekatronika di SMK Negeri 3 Wonosari,” J. Pendidik. Tek. Mekatronika, vol. 8, no. 7, pp. 622–632, Nov. 2018.
[37] M. P. Lukman, . J., and Y. F. Y. Rieuwpassa, “Sistem lampu otomatis dengan sensor gerak, sensor suhu dan sensor suara berbasis mikrokontroler,” J. Resist. (Rekayasa Sist. Komputer), vol. 1, no. 2, pp. 100–108, Oct. 2018, doi: 10.31598/jurnalresistor.v1i2.305.
[38] H. Kuswoyo, E. Susana, and H. Tjahjadi, “Design of Personal Health Monitoring Devices for Early Detection of Silent Hypoxia,” Teknik, vol. 43, no. 1, pp. 8–16, May 2022, doi: 10.14710/teknik.v43i1.42752.
[39] D. R. Arivalahan, “Development of Arduino based microcontroller through Internet of Things (IoT) for the measurement and monitoring of process environmental parameters,” Iaeme, vol. 12, no. 2, pp. 50–61, Feb. 2021, doi: 10.34218/IJEET.12.2.2021.006.
[40] W. Gay, “DHT11 Sensor,” in Advanced Raspberry Pi, Berkeley, CA: Apress, 2018, pp. 399–418. doi: 10.1007/978-1-4842-3948-3_22
[41] W. Setya et al., “Design and development of measurement of measuring light resistance using Light Dependent Resistance (LDR) sensors,” J. Phys. Conf. Ser., vol. 1402, no. 4, p. 044102, Dec. 2019, doi: 10.1088/1742-6596/1402/4/044102.
[42] G. Kilari, R. Mohammed, and R. Jayaraman, “Automatic Light Intensity Control using Arduino UNO and LDR,” in 2020 International Conference on Communication and Signal Processing (ICCSP), 2020, pp. 0862–0866, doi: 10.1109/ICCSP48568.2020.9182238.
[43] G. B. Alves, “Umistick: Developing a Blow-Based Joystick Using Arduino Sensors and a Printed Circuit Board,” 2018.
[44] D. Srivastava, A. Kesarwani, and S. Dubey, “Measurement of Temperature and Humidity by using Arduino Tool and DHT1,” vol. 05, no. 12, 2018.
[45] M. O. Sabir, P. Verma, P. K. Maduri, and K. Kushagra, “Electrically controlled artificial system for organic waste management using Black Soldier Flies with IOT monitoring,” in 2020 2nd International Conference on Advances in Computing, Communication Control and Networking (ICACCCN), 2020, pp. 871–875, doi: 10.1109/ICACCCN51052.2020.9362816.
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Athifa Sri Ismiranti, Akhmadi Akhmadi, Arini Arumsari, Mahendra Nur Hadiansyah, Alfito Aji Denandra, Sarah Nurul Azizah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
___________________________________________________________
International Journal of Visual and Performing Arts
ISSN 2684-9259
Published by Association for Scientific Computing Electronics and Engineering (ASCEE)
W: http://pubs2.ascee.org/index.php/viperarts
E: sularso@ascee.org
Organized by:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0