Vol 2, No 3 (2022)

The author's country affiliation is Saudi Arabia, Egypt, Bangladesh, Italy, Lithuania, Jordan, Tunisia, Malaysia, Indonesia, and Iraq.

Table of Contents

(1) Awatef K. Ali (National Telecommunications Institute, Egypt)
(2) MagdiSadek Mostafa Mahmoud (Control and Instrumentation Engineering Department, KFUPM, Dhahran, Saudi Arabia)
10.31763/ijrcs.v2i3.709 Views of Abstract: 1210 | PDF: 380
PDF
448-466
(1) Md Abdul Halim (The University of Catania, Italy)
(2) Md Momin Hossain (World University of Bangladesh, Bangladesh)
(3) Mst Jesmin Nahar (Begum Rokeya University Rangpur, Bangladesh)
10.31763/ijrcs.v2i3.524 Views of Abstract: 1097 | PDF: 337
PDF
467-476
(1) Justas Dilys (State Research Institute Center for Physical Sciences and Technology, Lithuania)
(2) Voitech Stankevic (Vilnius Gediminas Technical University Faculty of Electronics, Lithuania)
10.31763/ijrcs.v2i3.741 Views of Abstract: 2072 | PDF: 590
PDF
477-491
(1) Mutaz M. Hamdan (Department of Mechatronics Engineering, School of Engineering, The University of Jordan, Amman, 11942, Jordan)
(2) MagdiSadek Mostafa Mahmoud (Control and Instrumentation Engineering Department, KFUPM, Dhahran, Saudi Arabia)
10.31763/ijrcs.v2i3.731 Views of Abstract: 1541 | PDF: 448
PDF
492-522
(1) Mohamed Elouni (Advanced Systems Laboratory, Tunisian Polytechnic School, Tunisia)
(2) Habib Hamdi (Tunisian Polytechnic School, Tunisia)
(3) Bouali Rabaoui (Tunisian Polytechnic School, Tunisia)
(4) Naceur BenHadj Braiek (Tunisian Polytechnic School, Tunisia)
10.31763/ijrcs.v2i3.762 Views of Abstract: 1247 | PDF: 420
PDF
523-546
(1) Norsharimie Mat Adam (Automotive Engineering Centre (AEC), Universiti Malaysia Pahang, Malaysia)
(2) Addie Irawan (Automotive Engineering Centre (AEC), Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia)
10.31763/ijrcs.v2i3.774 Views of Abstract: 1036 | PDF: 341
PDF
547-561
(1) Abdel-Nasser Sharkawy (Mechatronics Engineering, Mechanical Engineering Department, Faculty of Engineering, South Valley University, Qena 83523, Egypt, Egypt)
(2) Mustafa M. Ali (Mechatronics Engineering, Mechanical Engineering Department, Faculty of Engineering, South Valley University, Qena 83523, Egypt, Egypt)
(3) Hossam H. H. Mousa (Department of Electrical Engineering, South Valley University, Qena 83523, Egypt, Egypt)
(4) Ahmed S. Ali (Mechatronics Engineering, Department of Mechanical Engineering, Assiut University, Assiut, Egypt, Egypt)
(5) G. T. Abdel-Jaber (Department of Mechanical Engineering, South Valley University, Qena 83523, Egypt, Egypt)
10.31763/ijrcs.v2i3.780 Views of Abstract: 1522 | PDF: 291
PDF
562-580
(1) Marcos Gonçalves (Federal University of Technology-Paraná (UTFPR), Brazil)
(2) Jose M. Balthazar (Federal University of Technology-Paraná (UTFPR), Brazil)
(3) Clivaldo Oliveira (Federal University of Grande Dourados, Brazil)
(4) Maria E. K. Fuziki (State University of Maringá, Brazil)
(5) Giane G. Lenzi (Federal University of Technology-Paraná (UTFPR))
(6) Angelo Marcelo Tusset (Federal University of Technology-Paraná (UTFPR), Brazil)
10.31763/ijrcs.v2i3.768 Views of Abstract: 1082 | PDF: 321
PDF
581-593
(1) Hari Maghfiroh (Department of Electrical Engineering, Universitas Sebelas Maret, Surakarta, Indonesia)
(2) Arthur Joshua Titus (Department of Electrical Engineering, Universitas Sebelas Maret, Surakarta, Indonesia)
(3) Augustinus Sujono (Department of Electrical Engineering, Universitas Sebelas Maret, Surakarta, Indonesia)
(4) Feri Adriyanto (Department of Electrical Engineering, Universitas Sebelas Maret, Surakarta, Indonesia)
(5) Joko Slamet Saputro (Department of Electrical Engineering, Universitas Sebelas Maret, Surakarta, Indonesia, Indonesia)
10.31763/ijrcs.v2i3.782 Views of Abstract: 1170 | PDF: 307
PDF
594-605
(1) Noorulden Basil Mohamadwasel (Al-Esraa University College, Baghdad, Iraq, Iraq)
(2) Alfian Ma'arif (Universitas Ahmad Dahlan, Indonesia)
10.31763/ijrcs.v2i3.798 Views of Abstract: 1219 | PDF: 287
PDF
606-609